Home Analyses

Analyses

% TWO-STROKE OIL IN PETROL | DISTILL.

ACID NUMBER - colour titration | ASTM D 974 - kleurtitratie

ACID NUMBER- potentiometric titration | ASTM D 664 - potent. Titratie

AEROBIC BACTERIA/MOULDS/YEASTS | EASICULT COMBI

AIR RELEASE TEST | ASTM D 3427

ANAEROBIC BACTERIA | EASICULT S

ANILINE POINT | ASTM D 611 - ASTM D 874

ASH CONTENT | ASTM D 482 - ASTM D 874

BASE NUMBER (BN/TBN) | ASTM D 2896 - ASTM D 664

BREAKDOWN VOLTAGE | IEC 60156

COLOUR | ASTM D 1500

CONGEALING POINT | ASTM D 97 - IP 15

CORROSION TEST - FORD TEST - Cast Iron | IP 287

CORROSION TEST - HERBERT TEST - Cast Iron | IP 125

CORROSION TEST Copper | ASTM D 130

DEMULSIBILITY | ASTM D 1404

DENSITY | ASTM D 1298

DILUTION WITH DIESEL (DISTILLATION) | ASTM D 322

DILUTION WITH FUEL | SETAFLASH ( go/no go )

DISPERSION ABILITY | CCD PHOTOMETER

DRIP POINT | ASTM D 566

FALEX EP TEST | IP 241 (D)

FILTERABILITY | NF E 48-690

FIRE POINT - COC - Cleveland Open Cup | ASTM D 92

FLASH POINT - COC - Cleveland Open Cup | ASTM D 92

FLASH POINT - PMCC - Pensky Martens Closed Cup | ASTM D 93

FOAM TEST | ASTM D 892

FRACTIONAL DISTILLATION | ASTM D 322

FUEL DILUTION BY MEANS OF GAS CHROMATOGRAPHY | GC

GAS CHROMATOGRAPHY | GC

GLYCOL (ANTIFREEZE) TEST | ASTM D 2982

ICP SPECTROMETRY of a lubricant - elements Zn, P, Ca, Mg, B, Si, Na, Fe, Cr, Mo, Al, Cu, Pb | ASTM D 5184 + voorbereiding van het monster

ICP SPECTROMETRY of a used oil - elements Zn, P, Ca, Mg, B, Si, Na, Fe, Cr, Mo, Al, Cu, Pb | ASTM D 5184

ICP SPECTROMETRY of an unused oil - elements Zn, P, Ca, Mg, B, Si, Na, Fe, Cr, Mo, Al, Cu, Pb | ASTM D 5184

INFRARED ANALYSIS | FT-IR

The oil sample is scanned in the infrared region between 4000 and 400 cm-1. During this process, the interatomic bonds of the oil absorb the infrared light at specific wave lengths and the infrared spectre becomes visible. With this technique, oils can be compared to each other and the amount of specific components in the oil can be assessed.

INSOLUBLE IN HEPTANE | ASTM D 4055

INSOLUBLE IN HEPTANE AND TOLUENE | ASTM D 4055

KINEMATIC VISCOSITY at 100°C | ASTM D 445

KINEMATIC VISCOSITY at 40°C | ASTM D 445

MICROSCOPY | IHM

MILLIPORE FILTRATION | ASTM D 4898 - AFNOR E 48-652

PARTICLE COUNT | ISO 4406 / NAS 1638 / SAE 4059J

PCB | IEC 61619

PENETRATION TEST OF LUBRICANTS | ASTM D 217

pH | ASTM D 1287

PQ index | Analex

PREPARATION OF A SAMPLE | verdunning

RESERVE ALKALINITY | ASTM D 1121

RPVOT (RBOT) | ASTM D 2272

SAPONIFIABLE PRODUCTS | ASTM D 94

SOOT CONTENT | IFP

STAIN TEST | IHM

SULPHUR | ASTM D 5184

SULPHURISED ASH | ASTM D 874

TANGENTIAL DELTA | IEC 60247

VISCOSITY INDEX | ASTM D 2270

WATER CONTENT by way of distillation | ASTM D 95 / IP 74

WATER CONTENT by way of the aqua test | AQUATEST

WATER CONTENT by way of the Karl Fisher method | ASTM D 1744

WATER CONTENT IN WATER GLYCOL | ASTM D 1744

WATER HARDNESS | AQUAMERCK